ESYLUX CU PS DALI Mode D'emploi page 9

Introduction/safety instructions
Dear customer,
Thank you for buying this high-quality ESYLUX product and for the trust you have placed in
us. The CU PS DALI – DALI power supply was developed and produced in Germany ("Made in
Germany"). To ensure that this device functions reliably and error-free, please read though
these operating instructions carefully.
Safety instructions
Work on the 230-V power system must be carried out by authorised personnel only, with due
regard to the applicable installation regulations/standards Switch off the power supply before
installing the system
This product is designed for its intended use only (as described in the operating instructions).
The device must not be changed, modified or painted — doing so will void any warranty claims.
You must check the device for damage immediately after unpacking it. In the event of damage,
the device must not be operated under any circumstances.
If you are unable to ensure that the device can be operated safely, it must be immediately
switched off and measures must be taken to prevent the device from being inadvertently switched
back on again.
GB
9