F.F. Group AC-D 224 EASY Notice Originale page 6

6 | English
ENGLISH
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
WORK AREA
Keep work area clean and well lit. Cluttered or dark
f
areas invite accidents.
Do not operate power tools in explosive atmo-
f
spheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
Keep children and bystanders away while operating
f
a power tool. Distractions can cause you to lose con-
trol.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never mod-
f
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of elec-
tric shock.
Avoid body contact with earthed or grounded sur-
f
faces, such as pipes, radiators, ranges and refriger-
ators. There is an increased risk of electric shock if
your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
f
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carry-
f
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the risk of
electric shock.
When operating a power tool outdoors, use an ex-
f
tension cord suitable for outdoor use. Use of a cord
suitable for outdoor operation reduces the risk of
electric shock.
If operating a power tool in a damp location is un-
f
avoidable, use a residual current device (RCD) pro-
tected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
f
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the influ-
ence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
Use personal protective equipment. Always wear
f
eye protection. Protective equipment such as hear-
ing protection used for appropriate conditions will
reduce personal injuries.
Prevent unintentional starting. Ensure the switch
f
is in the off-position before connecting to power
source, picking up or carrying the tool. Carrying pow-
AC-D 224 EASY - AC-D 250 EASY
er tools with your finger on the switch or energizing
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
f
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance
f
at all times. This enables better control of the power
tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
f
ery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelery or long hair
can be caught in moving parts.
POWER TOOL USE AND CARE
Do not use the power tool if the switch cannot be
f
turned on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source before
f
making any adjustments, changing accessories, or
storing power tools. Such preventive safety mea-
sures reduce the risk of starting the power tool ac-
cidentally.
Store idle power tools out of the reach of children
f
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or
f
binding of moving parts, breakage of parts and any
other condition that may affect the power tools op-
eration. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Use the power tool accessories and tool bits etc. in
f
accordance with these instructions, taking into ac-
count the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a haz-
ardous situation.
SERVICE
Have your power tool maintained in operation by an
f
authorized service and use only original spare parts.
This will ensure that the safety of the power tool is
maintained.
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the
machine's rating plate are compatible with the
power supply you intend to connect it to (Fig. 1).
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
rating label and compatible with the plug fitted.
If an extension lead is required, use an approved
and compatible lead rated for this appliance.
Follow all the instruction supplied with the ex-
tension lead.
*Double insulated: This product requires no
earth connection as supplementary insulation is
applied to the basic insulation to protect against
electric shock in the event of failure of the basic
insulation.