Oven Control Lock; Timer; Settings - Whirlpool WOS52EM4AS Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Oven Control Lock

The Oven Control Lock can be used to avoid unintended use of
the oven. When the oven is locked out, the oven cannot be
turned on by the control knobs or buttons.
To Activate:
1. Press and hold the Back button and the Confirmation button
at the same time for at least 3 seconds.
2. When the oven is locked, the oven cannot be turned on, the
functions associated with the buttons are locked, and the
display will show the Oven Control Lock symbol.
3. To deactivate the Oven Control Lock, repeat Step 1.
NOTE: Oven control lock can be activated during cooking by
completing Step 1. The oven can be turned off by turning the
Oven Control knob to the "Off" symbol. The previously-selected
function will have to be set again.
The Timer function can be used only with the oven switched off.
It is useful, for example, for monitoring the cooking time of pasta.
The time length cannot exceed 23 hours and 59 minutes.
Setting the Timer
1. With the Oven Control knob in the "Off" position, turn the
Browse knob until the desired time is displayed.
2. Press the Confirmation button to start the countdown. When
the set time has elapsed, the display will show "00:00:00,"
and a signal will sound. To mute the acoustic signal, press the
Confirmation button. The time of day will appear on the
display.

Settings

You can control several settings through the Settings Menu:
clock, Eco Mode, oven sounds and display brightness.
To access the Settings Menu, turn the Oven Control knob to the
Settings symbol.
Clock
The time must be set on the clock after power is supplied to the
oven.
Setting the Time
1. To change the time, turn the Oven Control knob to the
Settings symbol. "CLOCK" will appear on the display.
NOTE: If power has just been supplied to the oven and the
2 "hour" digits are flashing on the display, skip to Step 2.
2. Turn the Browse knob until the correct hour is displayed then
press the Confirmation button to select.
3. Turn the Browse knob until the correct minutes are displayed
then press the Confirmation button to select.
6

Timer

Language
The language must be set on the clock after power is supplied to
the oven.
Setting the Time
1. Turn the Oven Control knob to the Settings symbol.
2. Turn the Browse knob until "LANGUAGE" appears on the
display then press the Confirmation button to select.
3. Turn the Browse knob until the desired language is displayed
then press the Confirmation button to select.
Temperature Units
The temperature unit can be set to Fahrenheit (°F) or Celsius (°C).
Setting the Temperature
1. Turn the Oven Control knob to the Settings symbol.
2. Turn the Browse knob until "UNIT" appears on the display
then press the Confirmation button to select.
3. Turn the Browse knob until the desired temperature unit
(Fahrenheit or Celsius) is displayed then press the
Confirmation button to select.
Eco Mode
During Eco Mode, the display switches off when the oven is on
standby, or 5 minutes after the end of cooking. To view
information on the display, press a button or turn a knob.
1. Turn the Oven Control knob to the Settings symbol.
2. Turn the Browse knob until "ECO" appears on the display
then press the Confirmation button to select.
3. Turn the Browse knob to select the desired setting (On or Off)
then press the Confirmation button.
Oven Sounds
The oven sounds are preset to On, but can be turned Off.
1. Turn the Oven Control knob to the Settings symbol.
2. Turn the Browse knob until "SOUND" appears on the display
then press the Confirmation button to select.
3. Turn the Browse knob to select the desired setting (On or Off)
then press the Confirmation button.
Display Brightness
The brightness of the oven control display can be changed.
1. Turn the Oven Control knob to the Settings symbol.
2. Turn the Browse knob until "BRIGHTNESS" appears on the
display then press the Confirmation button to select.
"1" will appear on the display.
3. Turn the Browse knob until the desired brightness is reached
then press the Confirmation button.

Publicité

Table des Matières
loading

Table des Matières