Klarstein 10027868 Mode D'emploi page 12

Dear Customer,
Congratulations on purchasing this Klarstein eqipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure caused by
ignoring the mentioned items and cautions mentioned in the operation and installation instructions
are not covered by our warranty and any liability.
Technical Data and Safety Instructions 12
Product Description and Display 13
Before First Use 14
Manual Mode 14
Automode and Program 14
Using the Tamper 15
Helpful Hints 16
Cleaning and Care 16
Recipes 17
Disposal and Declaration of Conformity 21
Item number
Power supply
Power consumtion
Battery Tamper
• Read all the safety and operating instructions carefully and retain them for future reference.
• To protect against the risk of electrical shock, do not put plug, cord, or motor base of blender in
water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning or
removing contents from blender jar.
WARNiNG
Risk of injury! When the Start/Cancel icon is fl ashing in red color it indicates that the blender
is ready to operate. Avoid any contact with blades or movable parts.
• Refer all servicing to qualifi ed personnel. Servicing is required when the apparatus has been dama-
ged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• The use of attachments, including canning or ordinary jars, not recommended or sold by Klarstein
may cause fi re, electrical shock, or risk of injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of counter or table or touch hot surfaces.
• Do not place the blender on or near a hot gas
• Keep hands and utensils out of container while blending to reduce the risk of severe injury to per-
sons or damage to the blender. A scraper may be used but must be used only when the blender is
not running.
• BLADES ARE SHARP. HANDLE CAREFULLY.
• Always operate blender with the cover in place.
• Blender JAR must be properly in place before operating appliance.
Contents
Technical Data
10027868, 10027871
220-240 V ~ 50-60 Hz
1680 W
CR2032
Safety Instructions
12