Publicité
EN
The device is a heating device and so will be hot to the touch. Do not
pick up the boiling vessel during the boiling process as injury and
burning will occur. The boiling vessel, filter, and glass ware should be
left to cool for 2 minutes once the boiling process has finished before
handling.
SETTING ALARM AND TIME
ALARM
1. To set the Alarm time - long press (2 seconds) the rotary control
on the right of the machine until the buzzer sounds and the ALARM
symbol is flashing on the display then let go.
2. The ALARM mode is now operational;
3. Use the rotary control and rotate to change the hours then press
once to move along to the minute segment.
4. Rotate to change the minute digits.
5. Then press once to finish setting the alarm.
6. To check the ALARM time set short press the rotary control.
TIME
1. To set the time; long press (4 seconds) the rotary control on the
right of the machine until the buzzer sounds and the TIME symbol is
flashing on the display.
2. The TIME mode is now operational and use the rotary control and
rotate to choose between AM of PM. press rotary control to go to next
setting.
3. Set the hours by rotating the rotary control button and press once to
move along to the minute segment.
4. Rotate to change the minute digits.
5. Then a press to finish the process of setting the time.
8
OPERATION MODES
1. OFF Mode turns all alarms and boiling off
2. ALARM mode turns only alarms set on; but does not boil/brew.
3. ALARM + BOILING turns on alarm set and is the initial set for boiling
set. To confirm boiling set short press the MAKE button. The cup
symbol will illuminate when boiling set has been confirmed.
4. Once A+B mode has been set, boiling will only occur ONCE. You must
press make every night in order to turn cup symbol on and expect
a morning brew. Cup Symbol will turn off until the MAKE button is
pressed again to set boil on.
5. SNOOZE toggle snoozes the ALARM for 5 minutes.
6. RESET toggle resets the ALARM and will sound again 24hrs later in
A+B and A modes. The ALARM is only off in the OFF mode.
Warning
THIS DOUBLE USER ACTION ON A+B MODE IS A SAFETY
REQUIREMENT TO MAKE SURE
THAT BOILING MODE HAS NOT BEEN SET ACCIDENTALLY.
EN
9
Publicité
