Chauvet Professional COLORADO 1-TRI IP Manuel De Référence page 3

COLORado™ 1-Tri IP v2 QRG
Power Linking
AC Plug
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
You can link up to 14 COLORado™ 1-Tri IP v2 products at 120 VAC or
26 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
The COLORado™ 1-Tri IP v2 will work with a DMX controller using a regular
DMX serial connection.
www.chauvetprofessional.com.
The COLORado™ 1-Tri IP v2 uses a regular DMX data connection for its
DMX personalities: TR16, TOUR, ARC.1, AR1.d, AR1.S, and HSV. See the
User Manual to connect and configure for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16
personality, be sure that both dimming curves in SET > DIMX and SET >
CURV are set to OFF.
The COLORado™ 1-Tri IP v2 uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Before mounting this product, read the
clamp is capable of supporting the weight of the product. For our Chauvet line
of mounting clamps, go to
clamps/.
Overhead Mounting
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
A DMX
Safety
trusst.com/productcategory/base-plates-accessories-
Safety Cable
Secure the safety cable using
the passageway on the back
of the product.
3
Screw Color
Brown Yellow/Brass
Blue
Primer is available
Notes. Make sure the mounting
Mounting Clamp
Floor Mounting
EN
Silver
Green
from