LIMIT 1000-R Mode D'emploi page 6

POSITIONS
GB
1. Main switch
2. Laser lines output
3. Function key
4. 1/4" thread connection
5. Battery cover
2
Important notice: Please check the accuracy before using.
OPERATION
1. Power On and Off
1.1 Turn on the unit by pushing the main switch (Pos1) to ON position. This
release the pendulum and turns on both the horizontal and vertical line
1.2 Turn off the unit by pushing the main switch (Pos1) to OFF position. This
will turn off the lines and lock the pendulum.
4
3
1
4 5