SEDEA S-6700-HD Installation Rapide page 8

2 - Press the «UP» or «DOWN» button
to highlight «Installation», press
the «RIGHT» button to enter the
submenu.
3 - Press the «OK» button to enter the
«DVBS Installation» menu.
4 - Press the OK button to enter the
«Antenna connection» menu.
5 - Press the «LEFT» or «RIGHT» button to
select : «Fixed antenna».
6 - Press the EXIT key to exit this menu.
7 - Press the «UP» or «DOWN» button to
select : «Satellite List» and then press
the OK button to enter this menu.
8 - Press the «up» or «down» button and
then the «OK» button to select the
satellite to be installed (example below :
Satellite Astra).
9 - Press the EXIT key to exit this menu.
10 - Press the «UP» or «DOWN» button
to select : «Antenna Setup» and then
press the OK button to enter this menu.
- Satellite : choose the satellite
- Frequ. LNB : it is advisable to keep the
«Universal» setting.
- Transponder : use the «LEFT» and
«RIGHT» buttons to test the signal (level
and quality) of reception of your dish on
several transponders.
- DiSEqC : not used for single satellite
reception
- Polarity : it is advisable to keep the
setting «Automatic»
11 - Press the EXIT key to exit this
menu.
12 - Press the «UP» or «DOWN» button
to select : «Search mono satellite» and
then press the OK button to enter this
menu.
- Satellite : choose the satellite.
- Clear only : choose «YES» to store
free channels only or «NO» to store all
channels.
- Search for channels : TV+Radio / TV
channels only / Radio channels only.