SEDEA S-6700-HD Installation Rapide page 7

4
1 2 3
Quick installation guide
Installation
1. Connect the decoder to an electrical
outlet using the AC adapter.
2 - Dish (RF IN) : Use a coaxial cable with
«F» plugs to connect the receiver to the
satellite dish.
3 - Television : Use an HDMI or SCART
cord to connect the receiver to your
television. Attention : HD resolution
3 2 1
4
DC IN
1 - USB connector (input/output)
2 - Indicator light (red : standby / green : in
operation)
3 - Channel number display, function display
(menu...)
4 - Channel change and ON / OFF buttons
1 - Satellite signal input
2 - Satellite signal output (example : for
connection of a second receiver)
5
3 - HDMI TV output
4 - Scart TV output
5 - Power input : AC adapter supplied
(12Vdc / 1A)
(high definition) will only be obtained with
an HDMI cable.
INSTALLATION 1 SATELLITE
1 - Press the «MENU» button to enter
the main menu.
13/18V 200mA
LNB IN LOOP OUT HDMI TV