Product Details; Commissioning And Use - ARENDO FRUKOST 304280 Mode D'emploi

4. Product details

Lever forbread roll
warming rack
Crumb collector

5. Commissioning and use

Connect the power cord to a properly wired power socket. First proceed as
described in Section "3 Commissioning".
Ensure that the power plug has been inserted. Insert up to two toast slices
into the toast slot. Turn the "rotary switch provided for adjusting the degree of
toasting" to the desired setting and press the "slide switch" down until it snaps in
place. The heating elements warm up and the toasting process begins.
Once the process is complete, the "slide switch" automatically jumps back to its
original position. This means that the toasting process has finished and the bread
slices can be taken out carefully.
If the degree of toasting is not satisfactory, adjust it using the "rotary switch pro-
vided for adjusting the degree of toasting" and repeat the toasting again. In this
case, ensure that the toast does not get burnt. If the desired degree of toasting
has already been attained, you may then end the process at any time by pressing
the "CANCEL" key.
24
Bread warming rack
Toast slot
Display (indication of
remaining time + degree of
roasting)
Slide switch
"CANCEL"
"REHEAT"
"DEFROST"
Rotary switch provided
for adjusting the degree
of toasting
English