Bt Connection - auna StarMaker 2.0 Mode D'emploi

8. Press the  button to stop play.
Repeat Function
1. Follow the instructions for Loading a Disc and Playing a Disc.
2. When disc playback, press REPEAT button once and REPEAT indicator
on the LED display will be flashed. The unit will play the current track
repeatedly.
3. When disc playback, press the REPEAT button twice and REPEAT
indicator will be light up on the LED display. The unit will play all tracks
repeatedly.
4. To cancel the repeat function: press REPEAT button repeatedly until
REPEAT indicator light off on the LED display.
Program Function
1. When disc playback, press the
2. Press CD PROGRAM button.
3. PROG indicator on the LED display will blink.
4. Press the  /  buttons to select the track from the loaded disc you
wish to program.
5. Press CD PROGRAM button to confirm.
6. Repeat steps 5 and 6 to program the next track. It can be programmed
up to 20 tracks.
⏯
7. Press the button to start the program playing, PROG and
on the LED display will be light up.
8. Press the button twice to cancel the program.


BT CONNECTION

1. Press POWER ON/OFF button to turn on the Karaoke System.
2. Press SOURCE button to BT mode. The BT indicator will be blinking.
3. On your Smartphone / Tablet, turn on BT function and enable device
scanning.
4. When "StarMaker 2.0" shows on the BT scan, select it to connect it to
your device.
5. When both devices are successfully connected and PAIR/PROG indicator
will be light up, you are ready to play music wirelessly from your device.
⏯
6. Press the button of your Karaoke System or your external BT device to
start music playback.
7. Press the / buttons of your Karaoke System or press the next /
 
 button to stop mode.
⏯
indicators
EN
19