Pairing With Other Additional Phones - Fiat FIORINO QUBO 2008 Manuel D'utilisation

ACTIVATING THE
HANDS-FREE KIT
After first pairing, just turn the igni-
tion key to MAR to activate the sys-
tem. To pair your phone and the
hands-free kit after first pairing, get in-
to the vehicle with your phone on and
®
the Bluetooth function active.
PAIRING YOUR MOBILE
PHONE AND
THE HANDS-FREE KIT FOR
THE FIRST TIME
To pair your mobile phone with your
hands-free kit for the first time you
shall activate the Bluetooth
on your phone as described on your
phone user's guide. The correspond-
ing icon is displayed on your phone
when the function is active.
When pairing for the first time, the
message "Please, pair device". Phone/
hands-free kit pairing procedure de-
scribed in the phone manual shall
therefore be carried out (follow the
pairing instructions given on your
phone user's guide).
IMPORTANT When the use of
the hands-free kit with Bluetooth
wireless technology is not desired, it
is possible to lower the volume of the
message "Please, pair device" by set-
ting the sound system PHONE func-
tion to min. volume.
During the pairing procedure
the message asking for the pass-
code will be displayed; enter
"1234" as passcode and then con-
firm it.
Once this done, connection between
your phone and your hands-free kit
will take place automatically as soon
as the two devices are less than a few
®
function
meters apart. A "beep" will be heard,
indicating that connection is estab-
lished. Here follows an example of first
pairing procedure for the most com-
mon mobile phones.
IMPORTANT The system oper-
®
ates only when the ignition key is
turned to MAR. Pairing procedure
shall be performed only the first time
you pair your phone and your hands-
free kit. Should instruction "Please,
pair device" not be heard at first pair-
ing, reset the system by pressing si-
multaneously buttons A and B-fig. 1
for 2 seconds at least.
PAIRING WITH OTHER
ADDITIONAL PHONES
If you decide to pair another phone,
you just have to follow the ordinary
pairing procedure described in the
previous paragraph, in this way you
can connect up to 3 mobile phones.
To pair other phones you shall reset
the system (any phone number stored
will be cleared).
17