Agatec DM100 Mode D'emploi page 4

2 Safety and dangers
Make sure that the device is not used without instructions.
Make sure that the device is used exclusively according to the instructions.
Make sure that the safety settings are not disabled.
Make sure that indication labels and caution labels are not removed.
Do not open the device with tools (screwdriver etc.).
Make sure that the device is not converted or modified.
Avoid using accessories of other producers that are not recommended by Agatec.
Make sure that the device is not used carelessly:
when working on scaffolds
when climbing ladders
when measuring near running machines
when measuring on open machine parts or installations
Avoid aiming directly at the sun.
Avoid blinding other persons intentionally (also in darkness).
Make sure that the measuring position is secured sufficiently (e.g. in streets, on construction
sites, etc.).
Make sure that the device is in proper and flawless condition.
Do not use a defective device.
3 Correct ways of employment
measuring of distances
calculation of functions
e.g. areas and volumes
Use the device exclusively in an atmosphere that is permanently inhabitable by humans.
4 Foreseeable misuse
Do not use the device as a laser pointer.
Do not use the device in explosive or aggressive environments.
5 Areas of responsibility
5.1 Area of responsibility of the manufacturer of the original
equipment
Agatec SAS, Le Mesnil Le Roi, 78600 France (hereafter Agatec):
Agatec is responsible for the safety-related flawless delivery of the device, including the
operating instructions.
Agatec is not responsible for accessories produced by other manufacturers.
4/70