Publicité
Les langues disponibles
Les langues disponibles
Dead Battery Notification
Alarm will sound when a battery's charge becomes
low. An additional alarm will sound when the unit is
dead and powers off.
Charging a Hot or Cold Battery Pack
The Red Flashing charge indicator light on the
charger indicates that the battery pack temperature
is outside the charging range. Once the battery pack
is within the acceptable range, normal charging will
take place and the red light will be continuous. Hot
or cold batteries may take longer to charge.
Lithium-Ion Charging Status
Battery Pack
Red Charger
Temperature
Indicator
Light
Too Hot
Fast Flashing
Normal
Continuous
Range
Fast Flashing
Too Cold
MAINTENANCE
To reduce the risk of injury, always
WARNING
unplug the power supply and re-
move the battery packs from the chargers before
performing any maintenance. Never disassemble
the tool, battery packs or charger. Contact a
MILWAUKEE service facility for ALL repairs.
To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never im-
merse your tool, battery pack or charger in fluid
or allow a fluid to flow inside them. Corrosive
or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach con-
taining products, etc., can cause a short circuit.
Maintain Power Supply
Keep your power supply in good repair by adopting
a regular maintenance program. If the power supply
does not work properly, return the power supply to a
MILWAUKEE service facility for repairs.
To reduce the risk of personal in-
WARNING
jury, electric shock and damage,
never immerse your tool in liquid or allow a liquid
to flow inside it.
Cleaning
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use flammable or
combustible solvents around tools.
Charging Status
Not charging
Normal charging
Not charging
9
Cleaning the Battery and Battery Bay
Keep battery connections and surfaces between
the power source and battery free of debris and
materials.
Failure to keep surfaces clean may result in mis-
alignment and/or damage to the battery connection.
For repairs, return the tool to the nearest authorized
service center.
ACCESSORIES
Use only recommended accesso-
WARNING
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
www.milwaukeetool.com
or visit
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
Repairs
(1.800.729.3878)
Publicité
