After Use - Linde Domistar Notice D'utilisation

12 EN. Domistar, Hospistar, Neostar, PF4 - High Pressure regulators. Instruction for Use.
→ After completion of the therapy
• Turn off the cylinder valve by turning the hand wheel in a clockwise direction to
the stop position. Do not use excessive force.
• Vent gas pressure from downstream equipment.
• Disconnect the male QC probe from the pressure outlet.

6.3 After use

• Turn off the cylinder valve by turning the hand wheel in a clockwise direction
to the stop position. Do not use excessive force.
• Reset the flow control knob on the "ZERO" position – when the gas venting has
ceased (valid for version with flow-metering device only).
• Ensure the pressure gauge does not show any residual pressure.
• Remove connections from user outlets.
• Refit pressure outlet and flow outlet protection caps. Before refitting the caps,
ensure they are clean.
7. Cleaning
Remove general contamination with a soft cloth damped in oil free oxygen compat-
ible soapy water & rinse with clean water. Disinfection can be carried out with an
alcohol-based solution (spray or wipes). If other cleaning solutions are used, check
that they are not abrasive and that they are compatible the product materials
(including labels) and gas.
Do not use cleaning solutions containing ammonia!
Do not immerse in water or any liquid.
Do not expose to high temperature (such as autoclave).