General Maintenance; Replace The Scraper; Replace The Impeller - GreenWorks Pro SNC404 Manuel D'opérateur

CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
9.1

GENERAL MAINTENANCE

• Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
• Tighten correctly all the fasteners and caps.
• Clean the remaining snow on the machine with a brush.
9.2

REPLACE THE SCRAPER

24
24
WARNING
Use only approved replacement scrapers.
WARNING
Wear heavy gloves or wind cloth around the impeller when
you touch the impeller.
1. Remove the screws (24) from each side plate.
2. Remove and discard the old scraper (8).
3. Install the new scraper (8).
4. Put in the mounting screw (25) and spacers and tighten
them.
English
9.3
Use only approved replacement scrapers.
1. Remove the 5 screws (24) and side wear pad (26) that
2. Remove the nut (27).
3. Remove the 5 screws (24) and side wear pad(26) that
25
11

REPLACE THE IMPELLER

WARNING
secure the right side cover (31).
secure the left side cover (31).
EN