3.
Load laundry into washer
Load garments in loose heaps evenly
around basket wall. For best results, do
not pack the load tightly. Do not wrap
large items such as sheets around the
agitator; load them in loose piles around
the sides of the basket. Try mixing
different sized items to reduce tangling.
IMPORTANT: Do not tightly pack or
force items into washer. Items need to
move freely for best cleaning and to reduce
wrinkling and tangling. Load heavier items in fi rst. Do not load
above agi-peller. Do not load clothes above white inner collar.
4.
Add liquid chlorine bleach
to dispenser
Liquid
Chlorine Bleach
Do not overfi ll, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
NOTE: A Bleach Dispenser Block-Off
Cap is available.
5.
Adding fabric softener to optional
dispenser
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer's directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by fi lling the
dispenser with warm water until liquid reaches the underside
of the rim. See max fi ll line arrows.
Adding Liquid Fabric Softener Manually to Wash Load
During the fi nal rinse, wait until the washer has completed
fi lling. At that time, water valve will shut off and you will not hear
any water entering the washer. Press the START button for 3
seconds to pause the washer. Lift the lid and add the measured
recommended amount of liquid fabric softener. Do not use more
than the recommended amount. Close the lid and press the
START button again to start the washer.
6.
Select cycle
Appearance may vary.
Turn cycle knob to choose your wash cycle. For more
information, see "Cycle Guide."
MAX FILL
7