Changing The Oven Light; Troubleshooting - Samsung NE59 785 Serie Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Changing the oven light

The oven light is a standard 40-watt appliance bulb. It will come on when the oven
door is open. When the oven door is closed, press the
off. It will not work during a self-cleaning cycle.
Remove
Remove
Replace
Replace
Glass bulb cover
Glass bulb cover
Bulb
Bulb
pad to turn it on or
1.
Make sure the oven and the bulb are
cool.
2.
Unplug the range or disconnect the
power.
Turn the glass bulb cover in the back of
3.
the oven counterclockwise to remove.
4.
Turn the bulb counterclockwise to
remove it from its socket.
5.
Insert a new 40 watt appliance bulb,
and then turn it clockwise to tighten.
Replace the bulb cover by turning
clockwise.
6.
Plug in the range or reconnect the
power.
CAUTION
Before changing your oven light bulb,
disconnect the electrical power to the range
at the main fuse or circuit breaker panel.
Make sure the oven and the bulb are cool.

Troubleshooting

Troubleshooting
Samsung works hard to ensure that you don't have problems with your new
electric range. If you run into unexpected trouble, look first for a solution in the
table below. If, after trying the suggested solution, you're still having trouble, call
Samsung at 1-800-SAMSUNG (1-800-726-7864).
Installtion
Problem
Possible cause
The range is not
The appliance has been
level.
installed improperly.
The floor is sagging or
sloping.
The kitchen cabinets are not
properly aligned and make
the range appear to be not
level.
The appliance
The kitchen cabinets are not
must be accessed
square and too close to the
for servicing and
appliance.
cannot be moved
Carpet is interfering with
easily.
movement of the range.
Solution
Place the oven rack
in the center of the
oven. Place a level on
the oven rack. Adjust
the leveling legs at the
base of the range until
the oven rack is level.
Insure the floor is level
and strong and stable
enough to adequately
support the range.
Contact a carpenter to
correct the situation.
Insure the cabinets are
square and provide
sufficient room for
installation.
Contact a builder or installer
to make the appliance
accessible.
Provide sufficient space so
the range can be lifted over
the carpet.
English 47

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ne59j7750 serie

Table des Matières