Operation
Connect the power cable to a 13 amp supply which is located in a safe, dry area.
The switch on the heater is used to control the Heater. When the position mean on the 【ON】, the first
-
indicator light will be turn red, the heater will be in standby mode. The【OFF】 position will turn off the
Heater.
The panel control:
-
Although the patio heater is waterproof, do not use when raining or in wet conditions.
-
-
Never connect the power cable from the electrical supply, when the patio heater is not in use.
www.sunred.nl