Télécharger Imprimer la page

Team kalorik TKG FT 1012 Mode D'emploi page 15

Fritteuse à filtration d'huile

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Fax +32 2 359 95 50
STORING OIL
Do not store used cooking oil in the refrigerator. Choose a cool place that is not subject to
sunlight. Generally, oil may be stored for a period of 3 months, once the bottle is opened.
Please observe the oil manufacturer's storage directions as well.
HINTS AND TIPS
Smaller quantities of food normally require a slightly shorter cooking time than larger
quantities of food.
To reduce cooking time, defrost food prior to cooking. It is recommended that some foods
should not be thawed/defrosted prior to cooking, such as frozen fish, and frozen French
fries.
It is recommended to use a meat thermometer to check the cooking progress.
In the event of food flare-ups, do not remove the lid (3), do not remove the basket (6);
turn the temperature control knob (23) to the 0 position and unplug the appliance.
When the food you are cooking requires shaking, it is recommended to use a timer set for
half of the suggested cooking time. This way a bell will ring and remind you to shake the
basket (6).
It is recommended to only use nylon, heat-proof plastic or wooden cooking utensils. Metal
utensils may become hot and damage the non-stick surface. Always remove utensils from
the appliance. Do not leave them in the appliance during use.
CLEANING AND MAINTENANCE
Proper maintenance will ensure many years of service from your appliance. Clean the
appliance after every use. The appliance contains no user serviceable parts and requires little
maintenance. Leave any servicing or repairs to qualified personnel.
WARNING:
Always turn the temperature control knob (23) to the 0 position, after cleaning
thoroughly, before using or storing the appliance. Ensure that no water enters the
appliance housing (13).
Do not attempt to attach the magnetic plug permanently to the appliance.
Do not attempt to remove the silicon rubber sealing plate (22).
Ensure the oil container (15) is in place, then turn the oil filtration control knob (14) to FILTER
OIL position to empty the oil reservoir (9) (see Oil filtration).
Place the basket (6) on a clean, flat and heat resistant surface.
Danger of burns!
Ensure the basket (6) cooled down completely before touching its surface and
attempting to remove the basket handle (7).
Ensure the oil cooled down completely before emptying the oil reservoir (9) into the
oil container (15).
Remove the basket handle (7) from the basket (6).
Remove the control panel (21) from the oil reservoir (9). Carefully clean the control panel
(21) and immersion heater (20) with a damp cloth.
Pull the oil filter cover (11) from the oil reservoir (9) and then remove the oil reservoir (9)
from the housing (13).
Open the lid filter cover (28) and remove both black and white filters (26, 27) (ill. u).
Clean the appliance housing (13) with a damp cloth.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you keep
the good numbering when you turn the pages of the I/B.
Don't change the page numbering. Keep the language
integrity.
15
Assembly page 15/72
TKG FT 1012
- 180912

Publicité

loading