osann JUNIOR Mode D'emploi page 5

Storage of the instruction manual
Store this instruction manual, depending on the model of your vehicle, either in the pouch provi-
ded, or by slipping it into between the shell and the cover of the seat.
Maintenance advice
All the material parts can be removed. Slight stains can be removed using a damp sponge soaked in
soapy water or it can be washed by hand at 30° in soapy water. Do not use bleach, do not iron, do
not machine wash, and do not tumble dry.
WARNING
• This car seat is a "Universal" child restraint system. It has been approved in accordance with
regulation N°44/04, and is suitable for general use in vehicles and is compatible with the majority
(some exceptions) of vehicle seats.
• It is more likely that the seat is perfectly compatible if the vehicle manufacturer states that its
vehicles are suitable for taking "Universal" child restraint systems.
• This restraint system is classified as "Universal" in accordance with the strictest approval criteria,
whereas earlier models do not correspond to these new provisions.
• It can only be adapted to vehicles with 3-point safety belts that are either fixed or have a roller
mechanism and that have been approved compliant with the UN/ECE N° 16 or other equivalent
standards.
• If in doubt, contact the manufacturer or retailer of the restraint system.
Installation
Must be used for fastening a certified (ECE R16 or
equivalent standard) 3-point harness. Put the seat
on the vehicle seat and put the child into it. Fasten
the child with the 3-point seat belt buckle until it
„clicks". Refer to the adjacent drawing. The diagonal
belt should go over the shoulder of the child, as well
as over the armrest. Make sure that the belt fits
tightly and is not twisted.
EN