Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16
Removal from Pool
Depending on the model, you can manually
remove the cleaner from the pool or use the Lift
System* feature in app or on the control box.
The Lift System is designed to assist in retrieving
the robot from the pool. Lift System can be
activated at any time during or after a cleaning
cycle.
IMPORTANT: Only use Lift System when in view of the
cleaner.
1.
From the home screen, select
System to enter automated procedure.
2.
Use the left and right controls to rotate the
cleaner to face the wall of your choice.
3.
Press the Start Button to drive the cleaner
up the wall it is facing. The cleaner will wait
at the water line to be retrieved.
NOTE: To stop the procedure at any time, press and release
the button again.
4.
When in reach, grab the cleaner handle
and begin to pull cleaner out of the water.
The cleaner will quickly expel water to
allow for lighter, easier removal.
NOTE: Never lift the cleaner out of the pool by
the floating cable.
*not available on all models
In-App Error Messages and
Troubleshooting
If an error occurs, cleaning will be interrupted and
the app will display an error message.
The message will display:
•
The error code and name
•
A brief description of the error
•
A set of troubleshooting steps you can take to
resolve the error (if available for the error type)
Lift
Tap "Clear Error" when you believe you have fixed
the problem and want to try again or anytime you
want to return to the home screen.
System Settings
Access System Settings by pressing the gear icon
in the upper right hand corner of the app screen.
|
Robotic Pool Cleaner
Owner's Manual
Publicité
Chapitres
Table des Matières
Dépannage
