Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14
6
Installing
iAquaLink
(connected models only)
The iAquaLink app is available for download from
the App Store or Google Play.
With iAquaLink Control, you can connect to your
robotic cleaner from anywhere, anytime to access
functions and troubleshooting advice. App features
are dependant on model.
Before you begin installation, make sure
you have the following:
•
IMPORTANT: Have your Wi-Fi network
password available.
•
Robotic Cleaner submerged in the pool.
•
Control Box connected and plugged into a
GFCI outlet.
•
Smart device (phone or tablet) with Wi-Fi
and Bluetooth enabled
•
Wi-Fi router with sufficient signal strength
at the Control Box
Download the App
Install or update the iAquaLink app from the App
Store or Google Play.
®
Sign Up and Log In
Open the iAquaLink app, then Sign Up or Log In.
Complete all required fields in the Account Set Up
page and agree to the Terms and Conditions.
Add to Mobile App System
1.
On the My Systems page, click
upper right-hand corner to add a system.
2.
Choose "Robotic Cleaner". Follow in
app instructions to add your cleaner and
connect it to your home router.
3.
On the control box, press
Bluetooth light
BLINKING - searching for signal
SOLID - paired with phone
Wi-Fi light
BLINKING - connected to router
SOLID - connected to the internet
NOTE: Errors during connection may be the results of
insufficient Wi-Fi signal strength at the control box
location. If you are unable to move the control or
router to improve signal strength, you may need a
Wi-Fi extender to boost your signal strength. (See
iAquaLink Troubleshooting section.)
An incorrect password may also be that cause of a
connection error. If the signal strength at the control
box is good, double check the network name and
credentials for the router you are trying to access.
|
Robotic Pool Cleaner
Owner's Manual
+
in the
indicates status:
indicates status:
Publicité
Chapitres
Table des Matières
Dépannage
