LaCie hard disk Guide D'installation Rapide page 4

Setup Steps
1. Connect the power supply to a grounded surge
protector or wall outlet and to your LaCie Hard Disk.
2. Connect the Hi-Speed USB 2.0 cable to your
computer and to the drive.
3. Turn on the drive by moving the power switch
to the ON position. The drive will mount in My
Computer (Windows) or on your desktop (Mac).
4. Before using your drive, LaCie Setup Assistant
software must be launched to format your drive. It
will:
• O ptimize your drive according to your needs
• C opy the manual and utilities on your drive
To launch LaCie Setup Assistant:
Windows users: Double-click the LaCie drive icon in "My Computer".
Mac users: Double-click the "LaCie Setup Assistant" icon on your desktop.
NOTE: If you do not launch LaCie Setup Assistant or if you quit LaCie Setup Assistant after the
formatting has begun, your drive will not be ready to use and will require manual formatting. The
user manual and utilities will not be available on your drive and will have to be downloaded from the
LaCie website: www.lacie.com
NOTE: Using LaCie Setup Assistant does not prevent you from using your computer's native disk
utility program to format or partition your LaCie drive. Simply follow the Setup Assistant through
completion, then use your computer's native disk utility (Disk Management for Windows or Disk
Utility for Mac) to reformat your drive. See the user manual for more information.
All utilities And mAnuAls Are AvAilAble for free
downloAd from the lACie website: www.lACie.Com