Lionelo Babyline 5.1 Manuel De L'utilisateur page 7

2.
The display will illuminate after a few seconds and charging icon will be
displayed. This means that battery is being charged.
3.
Press and hold the power button to switch the parent unit on.
4.
To switch the unit off, press and hold the power button.
USING VIDEO BABY MONITOR
Setting up
Place the baby unit in a convenient place (e.g. on the table) and point the
camera towards the area you want to monitor (fig. 6).
NOTE
Do not place the baby unit or cables in the baby's cot or within its reach (at
least 1 meter of distance must be kept) because the child may get injured or
be strangled!
In the event of image or sound interference, change the location of the devices
and make sure they are not close to other electric equipment.
Pairing units
The baby unit and parent unit are paired by default. It is not necessary to pair
them again, unless the baby unit has lost connection with the parent unit. If
necessary, see MENU – Camera registration.
VOX function
VOX mode can be activated in the device's menu.
VOX mode automatically puts the display in the sleep mode to save battery.
When the baby unit detects any sound, the parent unit responds to this,
activates the display and preview of a unit which detected the sound.
Music player
Press the music button to play the lullaby in baby units. Press the button
again to turn it off.
Talk function
In the screen you can see icon 1 or 2 which tell you which baby unit is currently
displayed in the screen. If you wish to start talking to your child, press and hold
talk function button. The talk symbol will be displayed at the bottom of the screen.
‑ 7 ‑ EN