Avtech PUSH VIDEO Installation Rapide page 2

419Z
Quick Setup
with iPhone / iPad
Remote access fully compatible with:
1. Internet Explorer on Windows OS
2. iPhone, iPad & Android mobile devices
This quick setup assumes your
network connection is "wireless
router + modem".
For other types of connection,
please download the
instructions for network
configurations from
www.surveillance-download.com/user/n812.swf
812_V1.2
3
Connect Camera to Wireless Router with One Press
For other wireless setup methods, download "Advanced Network Setup" from:
www.surveillance-download.com/user/n812.swf
a)
b)
Camera:
Press
and
hold
c)
Release
when
you hear
If you hear "Failed", check if the authentication method of your wireless
Started
router is "WPA" or "WPA2". If no, please change accordingly and try again.
Package Content
with iPhone / iPad
Remote access fully compatible with:
1. Internet Explorer on Windows OS
2. iPhone, iPad & Android mobile devices
This quick setup assumes your
network connection is "wireless
router + modem".
For other types of connection,
please download the
instructions for network
configurations from
www.surveillance-download.com/user/n812.swf
Camera
Adapter Bracket Quick Setup
1
Assemble & Install
1. Fasten the base
of the bracket
(the round one)
to where the
camera is
installed.
The distance between your camera and the location you
want to monitor should be 3 ~ 4 meters.
2. Assemble the bracket and the camera, and adjust the
viewing angle of the camera.
3. Fasten the antenna for wireless network connection.
4. Connect your camera to power.
Wireless router:
Press the quick setup button within 30 seconds.
To know where the quick
setup button of your
wireless router is, please
check your router's user
manual.
Connection OK.
Always on
OK
2
Prerequisite
(Recommended) Apply your own ADSL or cable Internet service to simplify the network configurations.
Quick Setup
You have installed our mobile program, EagleEyes-Lite or EagleEyes-Plus on your iPhone or iPad.
If no, please download from "App Store".
(Optional) Your wireless router supports UPnP, and this function is enabled.
Antenna
Your wireless router is configured to Internet.
You know the IP address to access your wireless router.
If you don't know, check the user manual of your router, or follow the steps below to check and write it down.
Connect your iPhone / iPad to the wireless network you want to use for network configurations, and go to
"Settings"  "Wi-Fi".
Select ">" near the selected wireless network to enter the details.
4
Network Configuration from iPhone / iPad
Step1: Connect your iPhone / iPad to the wireless network your network camera is connected.
EagleEyes
Lite or Plus
iPhone / iPad
Step2: Open "EagleEyes-Lite" (or "EagleEyes-Plus"), and follow the steps from (a) to (c) below.
Select the IP address you found, such as "192.168.2.105" in our example below.
(a)
Router: The IP address of your wireless router.
Wireless
Network
Camera
(c)
(b)
If you can't find the
camera, make sure your
LAN status indicator ( )
is always on, and wait for
3 minutes to search again.