Setup - Elipson Prestige Facet PF 6B BT Mode D'emploi

SUMMARY
I. CONTENT
Prestige Facet 6B BT
• 1 active speaker
• 1 passive speaker
• 2 removable magnetic grid
• 1 user manual
• 4 rubber pads per speaker
• 1 remote control
• 1 speaker cable
• 1 power cable
II. SETUP
SETUP PRESTIGE FACET 6B BT
Sticking the rubber pads
We recommend that you stick the rubber
pads, provided with the removable base, on
the loudspeakers. If you use the loudspeakers
without the removable base, you should
place the rubber pads on the provided
inserts, to avoid any damage.
As a rule, you can stick the rubber pads under
the loudspeakers or under its base in order to
protect the loudspeaker itself and its base.
Prestige Facet 14F BT
• 1 active speaker
• 1 removable base
• 1 removable magnetic grid
• 4 screws
• 1 user manual
• 4 decoupling spikes
• 1 remote control
• 1 speaker cable
• 1 power cable
SETUP PRESTIGE FACET 14F BT
1. Mounting the removable base on the cabinet
Carefully turn the cabinet over and place
it on the packaging foams, or on a carpet,
to avoid any damage of the top part. Take
care not to damage the woodworking, the
lacquered front or the loudspeakers during
this operation. Adjust the base on the cabinet
and screw it using the four provided screws.
2. Putting spikes
After mounting the base of the speaker,
screw the spikes on it (no required tools).
Note : The presence of pads or decoupling
spikes prevents vibrations to be transmitted to
the floor.
21