Stereo Setup - Elipson Legacy 3220 Manuel D'utilisation

Introduction
Thank you for choosing Elipson. Please read carefully the following
information before using your new loudspeakers. It contains tips
to get the most of it and instructions for safety use. We strongly
recommend that you keep the packaging and this user manual
for further use. You will find the following elements within the
packaging:
1.
Loudspeaker.
2.
Protective cover.
3.
Gloves.
4.
Counter-spikes.
5.
User Manual.

Stereo setup

The Legacy loudspeakers have been designed to reproduce all
types of music as accurately as possible, provided that a few
rules should be followed to optimize performance and achieve
a realistic sound image. Ideally, the speakers should be placed
symmetrically in front of the listening position to form an equilateral
triangle. The cabinets should be placed at the same height, the
same distance from the rear wall and from the adjacent side
surfaces.
In order to optimize the setup of the speakers in your listening
room, we recommend the following tests:
Above all, you should avoid positioning the loudspeakers in the
corners of your room. The result will be an artificial increase in the
level of bass, masking the speed and details of this range.
First, adjust the spacing of the two speakers in order to find the
realistic balance between a wide sound image (wide apart
speakers) and a sound image respecting the punctuality of the
voices (close speakers).
Secondly, move the speakers away from the rear wall by steps
of 10 cm to find the balance between the depth of the sound
image (far from the back wall) and the level of the extreme low
frequencies (close to the back wall).
Elipson Legacy 3220