Enclave Audio EA-200-HTIB-US Mode D'emploi page 12

1. Download and install the Enclave Audio mobile app and follow the on-screen
instructions on your phone.
2. Plug in all power cables to the rear power connector on each speaker and power
the speakers at a convenient wall outlet.
3. Connect the HDMI cable provided from the CineHub HDMI port to the HDMI port
marked (eARC or ARC) on your television or;
4. If you have elected to use an Optical connection, connect the Optical cable to the
Optical connector on your TV and the CineHub.
5. Plug in the Enclave CineHub and the CineHub will start the auto-pairing process.
6. The speakers will automatically pair when power is connected to the CineHub
for the very first time. It may take up to 30 seconds for the system network to be
established. The Enclave Audio app will display the status of the speaker pairing
process.
Note: While the system is pairing to the speakers you will not be able to turn on or off
the power until the pairing process is completed.
Note: SATELLITE SPEAKERS & SUBWOOFER BACK PANEL When the Enclave CineHub
is powered off, all the speakers go into a low-power standby state and should remain
plugged in at all times. The LED indicators on the rear of the speakers will turn off. The
speakers will "power up" again when you turn on the Enclave CineHub.
EN11