Legend Brands DRI-EAZ HEPA 700 Manuel Du Propriétaire

The HEPA 700 draws air in from the surrounding environment and passes it through an advanced filtration
system. The unit removes airborne particles such as dust, mold spores, pollen, pet dander and other debris, and
odors, and can be configured for negative or positive-pressure filtration setups.
R E A D A N D U N D E R S T A N D B E F O R E O P E R A T I N G
ELECTRIC SHOCK HAZARD
The unit must be electrically grounded. Use only on
GFCI protected receptacles.
Connect to a properly grounded outlet only. Do not cut
off the grounding prong. Do not use with an adapter.
Do not use with extension cords.
Do not use with damaged cord or plug. If unit is not working as
it should, has been dropped, damaged, left outdoors, or
exposed to water, return it to an authorized service center for
repair.
Unplug cord from outlet when not in use or when servicing unit.
ELECTRIC SHOCK HAZARD
Keep motor and electrical parts dry.
Do not use outdoors. For indoor use only.
Do not handle plug or unit with wet hands.
Do not operate unit in standing water.
BREATHING HAZARD
When using the HEPA 700 in a containment area, turn
off all sources of power to open combustion
appliances such as fireplaces, boilers, furnaces, water
heaters and HVAC systems to avoid the risk of backdrafting
deadly carbon monoxide fumes.
Parts Identification
Filter cover buckle
(×4). Release to
replace filter
elements.
Air intake
ring. Attach
14 in. semi-
rigid ducting.
Inlet and
inlet cover.
Remove
cover
before
operating.
124775B HEPA 700
Owner's Manual
HEPA 700 Air Scrubber
Control panel.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
ATWINC3400-MR210CA module approvals:
•
United States/FCC ID: 2ADHKWINC3400
•
Canada/ISED:
o
IC: 20266-ATWINC3400
o
HVIN: ATWINC3400-MR210CA
o
PMN: Wi-Fi and Bluetooth Module
Carry handle.
Folds down when
not in use.
Feet for
horizontal
operation &
stacking.
115V outlets
(×2) and
breaker reset
switch.
Use the hook-and-pile
fasteners to attach the inlet
cover here while unit is use.
1
Filtered air
outlet. Filter
retainer ring may
be used to
attach 14 in.
diam. layflat
ducting.
Legend Brands, Inc.