Domo DO159A Mode D'emploi page 27

BEFORE THE FIRST USE
· Carefully remove the device from the packaging. Remove any promotional stickers.
· Clean the outside of the device with a soft damp cloth.
USE
Insert the plug into a power socket and insert the other end of the adapter into the connection point
of the air cooler. A beep indicates that the device is in standby mode. You can control the fan from the
control panel. Each time a button is pressed, the device emits an audible signal. The desired setting
appears on the display.
ON/OFF: ON/OFF BUTTON
Press this button to turn the device on or off. The latest configuration will be applied automatically when
the device is turned back on.
MODE: MODE KNOB
This button allows you to configure three functions: ventilation, natural and sleep mode.
Ventilation
Press the button once to activate ventilation. A symbol
setting is activated. This setting allows for 6 speed configurations. Each press of the speed settings button
will increase the speed. The selected speed appears on the display. The fan will maintain a constant
speed in accordance with the speed configuration.
Natural
Press the mode knob twice to activate the natural mode. A symbol
that this mode is activated. It is not possible to select a speed in this function, the display shows '1'. The
fan simulates a natural breeze.
Sleep mode
Press the mode knob three times to activate sleep mode. A symbol
that this mode is activated. It is not possible to select a speed in this function, the display shows '1'. The
fan distributes a constant light breeze.
SWING: OSCILLATION BUTTON
Press the oscillation button to rotate the vertical air vent left to right in order to distribute the air. The
associated symbol appears on the display. Press this button again to deactivate the function.
HUMIDIFIER/COOLER
The air cooler can also be used as a humidifier. This is recommended if the air in your home is very dry.
Press the humidifier/cooler button to activate this function. The associated symbol
display. The water pump transports water to the honeycomb water filter in order to generate a cool air
flow. Press this button again to deactivate the function. Make sure the water reservoir contains water
before activating this function. In order to do this, follow the steps below.
1. Place the 2 refrigerating elements with water in the freezer until completely frozen. Attention: never
open the refrigerating elements to prevent potential damage.
www.domo-elektro.be
appears on the display to indicate that this
appears on the display to indicate
appears on the display to indicate
appears on the
27
DO159A