Battery Charger - S.P.E. GREEN 2 Mode D'emploi

Chargeur de batterie à haute fréquence
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
check that the sleeving on the mains cable and battery cables is in good condition. Should one of the cables be
damaged, have it replaced by a S.P.E. ELETTRONICA INDUSTRIALE qualified technician.
The S.P.E. ELETTRONICA INDUSTRIALE charging device needs no special maintenance, apart from regular
cleaning procedures, to be carried out periodically according to the type of working environment. Before starting
to clean the device, the mains supply cable and battery cables must be unplugged.
Where to install:
SUGGESTED MOUNTING HEIGHT: WALL MOUNT – at least 1,5m from the bottom side of the charger, 0,5m
from the side wall and at least 0,65m from the top. This to avoid dust and moisture sucked up from the ground
level.
BATTERY
CHARGER
1,5m (59.1 inch)
D00241-03
BATTERY
CHARGER
0,5m (19.7 inch)
User Manual
0,65m (25.6 inch)
BATTERY
CHARGER
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Green 4

Table des Matières