REVELL Control Bull Scout Mode D'emploi page 6

24629
Safety instructions:
• This vehicle is suitable for pilots
who are at least 8 years of age.
Parental supervision is required
when driving it.
• Warning! Not suitable for children
under 36 months. Small parts.
Choking hazard!
• This vehicle is suitable for use
indoors and in dry outdoor areas.
• Keep your hands, face and loose
clothing away from the vehicle
during operation.
• Switch off the remote control and
vehicle when they are not in use.
• Remove the batteries from the
remote control and the vehicle
when they are not in use.
• Always maintain visual contact with
the vehicle in order to avoid losing
control of it. Inattentive and careless
use can lead to considerable damage.
• Please keep this operating manual
safe for later use.
• The user should only operate this
vehicle in accordance with the
instructions for use in this operating
manual.
• Do not use the vehicle near people,
animals, bodies of water or power
lines.
• This vehicle is not suitable for people
with physical or mental disabilities.
We recommend that people who
are unfamiliar with model vehicles
operate the model under the
guidance of an experienced user.
• This vehicle may not be used on
public roads!
• In general, it must be ensured that
the vehicle cannot injure anyone
in consideration of potential
mal functions and defects.
10
IMPORTANT FEATURES
RC-Monster Truck
• Model truck with MHz remote
control MHz remote controls
• With LED headlamps
• Fully functional
• The product may only be repaired
or modified with approved original
parts. Otherwise, the vehicle can
be be damaged or pose a danger.
• In order to prevent risks, always
operate the vehicle from a position
which provides an easy line of
retreat, if necessary.
Remote control safety instructions:
• Rechargeable batteries must be
removed from the remote control
prior to recharging.
• Non-rechargeable batteries may not
be charged.
• Rechargeable batteries may only be
charged under the supervision of an
adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• We recommend new alkali manganese
batteries for the remote control.
Single-use batteries for this remote
control and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Batteries must be inserted according
to the correct polarity (+ and -).
• Depleted batteries must be removed
from the remote control.
• The connection terminals may not be
short-circuited. Please remove the
batteries from the remote control and
model if they are not to be used for
an extended period of time.
• As soon as the remote control no
longer functions reliably, new
batteries should be inserted and/or
the batteries should be charged.
Maintenance and care:
• Please only use a clean, damp
cloth to wipe off the vehicle.
• Protect the vehicle and batteries from
direct sunlight and/or direct heat.
• Never allow the vehicle, the remote
control and charging unit to come into
contact with water. This may result in
its electronics becoming damaged.
• Transformers, power supplies or
battery chargers used with the model
are to be regularly examined for
damage to the cord, plug, enclosure
and other parts, and in the event of
such damage, they must not be used
until the damage has been repaired.
Battery requirement for
the remote control:
Power supply:
Batteries: 1 x 9 V E-Block 6LR61
(included)
Battery requirement for
the vehicle:
Power supply:
Batteries: 5 x 1,5 V AA
(included)
1 VEHICLE
1A Driven axle
1B Headlamp
1C Antenna under the bodywork
1D ON/OFF switch
1E Straight-ahead trimming
1F Battery compartment
1G Battery compartment securing screw
2 REMOTE CONTROL
2A Throttle lever 2E Battery
compartment
2B Power LED
2F Securing lever
2C Antenna
2D Steering lever
Please note: The remote control does not
have an ON/OFF switch. It is activated
automatically when the throttle/steering
lever is actuated.
3 INSERTING BATTERIES
Remote Control
3A Open the battery compartment
cover by lifting the securing lever (2F).
3B Now insert a 9 V battery and pay
attention to the polarity, as shown in
the battery compartment (2E). Then
close the battery compartment again.
3C Carefully insert the accompanying
antenna (2C) in the hole on the top
of the remote control and screw it in
carefully in a clockwise motion.
Modell
3D Unscrew the securing screw (1G) of
the battery compartment with a stan-
dard screwdriver, then open the flap.
3E Insert 5 x AA batteries and pay
attention to the polarity, as shown
in the battery compartment.
3F Then replace the cover and screw in
the securing screw (1G) clockwise.
11