User Replaceable Accessories And Spare Parts - VWR TL824 BF Manuel D'instructions

Cleaning the optics
If the optical parts require cleaning first use compressed air.
If that is not sufficient use a soft lint-free cloth with water and a mild detergent.
And as a final option use the piece of cloth moistened with a 3:7 mixture of ethanol and ether.
Note: ethanol and ether are highly flammable liquids. Do not use them near a heat source, near sparks or
near electric equipment. Use these chemicals in a well ventilated room.
Remember to never wipe the surface of any optical items with your hands. Fingerprints can damage the op-
tics. Do not disassemble objectives or eyepieces in an attempt to clean them.
For the best results, use the VWR cleaning kit (see catalogue number below).
If you need to send the microscope to manufacturer for maintenance, please use the packaging if possible.

User replaceable accessories and spare parts

DESCRIPTION
WF10x/22mm eyepiece (pair)
WF10x/22mm micrometer eyepiece (10mm, 0.1mm div.)
WF15X/16mm
4x IOS PLAN objective
10x IOS PLAN objective
20x IOS PLAN objective
40x IOS PLAN objective
60x IOS PLAN objective
100x IOS PLAN objective
10x IOS PLAN objective, for Phase Contrast
20x IOS PLAN objective, for Phase Contrast
40x IOS PLAN objective, for Phase Contrast
100x IOS PLAN objective, for Phase Contrast
Centering telescope for phase contrast
Polarizing set (filters only)
Lambda filter for polarizing set
Darkfield condenser for dry obj.For 500/800
QUANTITY
10
CAT. NO.
2 630-1967
1 630-1968
1 630-1969
1 630-1970
1 630-1971
1 630-1972
1 630-1973
1 630-1974
1 630-1975
1 630-1976
1 630-1977
1 630-1978
1 630-1979
1 630-1981
1 630-1982
1 630-1983
1 630-1741