Troubleshooting; Warranty; Disposal - Dometic BUTTNER MT ICC Info Control Instructions De Montage Et De Service

Troubleshooting

➤ Occasionally clean the device with a soft, damp cloth.
➤ Regularly check live cables or lines for insulation faults, breaks or loose connections.
The device is maintenance-free.
10 Troubleshooting
If the inverter charger combination automatically shuts down after triggered in fault mode, the
Check LED (fig. 2, page 4, 9) starts flashing and the display shows an error message. This mes-
sage automatically disappears when the error is corrected.
Depending on the operating status, the respective actions to be carried out:
➤ To turn off the inverter charger combination, press the On / Off / Mode button (fig. 2, page 4,
8) once.
➤ To change the operating mode, press the On / Off / Mode button (fig. 2, page 4, 8) for 3 sec-
onds.
11

Warranty

The statutory warranty period applies. If the product is defective, please contact your retailer or the
manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the
product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can have safety consequences and might void the
warranty.
12

Disposal

Recycling products with non-replaceable batteries, rechargeable batteries or light
sources
➤ If the product contains any non-replaceable batteries, rechargeable batteries or
light sources, you don't have to remove them before disposal.
➤ If you wish to finally dispose of the product, ask your local recycling center or spe-
cialist dealer for details about how to do this in accordance with the applicable dis-
posal regulations.
➤ The product can be disposed free of charge.
Recycling packaging material
➤ Place the packaging material in the appropriate recycling waste bins wherever pos-
sible.
12
ICC Info Control
EN