Ferroli ANTARES Manuel D'installation, D'utilisation Et D'entretien page 48

Level 1
04 – Select language
05 – Standby mode
06 – Buzzer
07 – Initial loading
08 – Stove status
4.6.1 Menu 01 – adjust fans
If enabled, the menu item 01 adjusts the fan speed in the DUCTED version, whereas in the standard version it is
excluded since the speed is automatic and fixed according to the selected output.
4.6.2 Menu 02 – set clock
Before operating with the stove it is necessary to set the current time and date so that there is a reference for
possible chrono programming.
The electronic controller has a lithium battery giving the internal clock an autonomy of more than 3-5 years.
4.6.3 Menu 03 – enable chrono
Allows all chronothermostat functions to be enabled/disabled.
Regarding the selection and entering of times, use the six buttons,
following the table in par. 4.2.
By accessing the submenu: DAY PROGRAM, the daily
chronothermostat functions can be enabled/disabled and set.
It is possible to set two operation phases delimited by the times
set according to the following table where the OFF setting tells the
clock to ignore the command.
Selection
Meaning
Activation time
Deactivation time
Activation time
Deactivation time
Level 2
01 - Italian
02 - French
03 - English
04 - German
Possible values
Level 3 Level 4
Input
Dialogue box
Dialogue box
48
Value
set
set
set
set
on / off
on / off
set
-
Menu level
Menu level
ANTARES