Emotron EMX Serie Manuel D'instructions page 4

Safety instructions
During installation
• Read the instruction manual completely before installation and commis-
sioning.
• The installation must be carried out by qualified personnel.
• General conditions and regulations for the installation and operation of
electrical machinery must be observed.
• Measures to protect against personal injury and damage to the machine
must be taken following local rules and regulations.
• The drive system EMX-R is intended for permanent installation.
• Cables may not be connected or disconnected while the supply voltage is
on.
• Check that the equipment is correctly connected before it is taken into use,
see the instructions in the chapter on Mounting/Connection.
• Faults that arise due to faulty installation or operation are not covered by the
guarantee.
During operation
• Measurements in the control unit, during operation, must only be carried
out on the terminals and only by authorized personnel. NOTE! Great care
must be taken.
• The units may not be opened or disassembled during operation.
During disassembly and scrapping
• The product is designed to comply with the RoHS directive, and shall be
handled and recycled in accordance with local legislations.
Emotron AB 01-3333-01r3