Gourmet Maxx K2302E3 Mode D'emploi page 27

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Place the food into the device.
If you are using the rack, you must make sure that the hooks on the rack sit
correctly under the selected guide rail in the device.
If you are using the rotating spit, make sure that the holders fi x the food in place
in the middle of the spit and the ring bolts are tightened. The end of the spit must
be inserted into the opening in the middle of the right-hand inner wall. Place the
square end of the spit into the bracket on the left-hand inner wall.
7. Press the
button to start the cooking process.
If you have selected a programme with a preheat function, the cooking process starts
automatically 5 seconds after the preheating has fi nished.
A programme without a preheat function must be started manually.
The cooking process can be interrupted by pressing the
To continue the cooking process, press the
Please note that the device does not heat continuously during the cooking
process. Once the set temperature has been reached, the heating elements switch
off. In the
recirculating air also stops. If the temperature in the device drops below the set
temperature, the device begins to heat up again so that a constant temperature can
be maintained. In the
for the recirculating air also switch on again.
8. After the cooking time ends, a signal sounds six times.
9. To switch off the device, press the
and
programmes, the rotating mechanism or the fan for the
and
programmes, the rotating mechanism or the fan
button.
27
button.
button again.

Publicité

Table des Matières
loading

Produits Connexes pour Gourmet Maxx K2302E3

Ce manuel est également adapté pour:

Z 02493

Table des Matières