Instructions For Use Suspended Luminaire DYP 228(D), DYP 254(D) „TYCOON"
ENG
What to do if ...
?
16
... the newly inserted lamps
flicker?
Only applicable with dimmable
lights DYP*/D
To avoid flickering, use the new flu-
orescent lamps that have not been
burned in yet, in an undimmed
condition for approx. 100 h first
(according to the specifications of
the lamp manufacturer).
... the lamp are not dimmed
synchronously?
Only applicable with dimmable
lights DYP*/D
If lamps exhibit different dimming
levels, carry out the following steps
to synchronize them:
a) Press switch for a longer period
-> all lamps should be turned on
now
b) Press switch for only a short
period -> all lamps should be
turned off now
c) Press switch for a longer period
again -> all lamps should be
turned on at a minimum dim-
ming and then increase.
After all steps have been carried
out,the lamps are now synchro-
nized again. The set dim value,
however, won't change.