Using The Vacuum Cleaner - Inventum ST418RS Mode D'emploi

CHARGING THE VACUUM CLEANER
Place the vacuum cleaner on the base of the charging stand. Make sure you align the connection
points at the back of the vacuum cleaner with the connection points of the charging stand.
As soon as the adaptor is plugged in, the vacuum cleaner will charge. The indicator light is red.
When the battery of the vacuum cleaner is empty, the charging will take 4½ hours. When the battery
is completely charged, the charging will stop. The indicator ligth will turn green and after a while it will
be off.
Unplug the adaptor when the vacuum cleaner is left on the charging stand for a longer period of
time without being used.
Warning! Always ensure your hands are dry before placing the appliance on the charging stand.
Warning! Never touch the brush inside the turbo brush when the appliance is on.
Waarschuwing! Only use the original included adaptor to charge the vacuum cleaner. Ohter adaptors can damage the appliance and
even be dangerous.
5

using the vacuum cleaner

SWITCHING THE VACUUM CLEANER ON
[ 1 ] on the handle of the vacuum cleaner to switch the vacuum cleaner on. The suction power control can
Press the on/off button
be set to MIN - MAX with the button MIN - MAX on the handle.
The turbo brush will rotate automatically when the vacuum cleaner is switched on.
USING THE VACUUM CLEANER AS A HAND HELD
The vacuum cleaner can also be used as a hand vacuum cleaner.
Remove the handle by pressing the button to disconnect the handle [10]. Press the on/
[ 3 ]on the handle of the hand vacuum cleaner to switch it on.
off button
The hand vacuum cleaner can be used with of without the turbo brush or crevice nozzle.
Place the crevice nozzle in the opening of the hand vacuum cleaner.
The crevice nozzle can be used in two ways: folded in as a crevice nozzle or folded out
with a brush.
INDICATION OF THE INDICATION LIGHT
The on/off button [ 3 ] has a indication light.
During the use of the vacuum cleaner, the indication light is green. When the battery is almost empty, it will flash green, indicating the
battery needs to be charged.
When the vacuum cleaner is connected to the charging stand, the indication ligth is red. When the battery is completely charged, the
charging will stop. The indicator ligth will turn green and after a while it will be off.
STORAGE
Put the vacuum cleaner on the charging stand after every use. For compact storing, unloch the
handle and place it on the charging stand next to the vacuum cleaner.
When the vacuum cleaner needs to charged, make sure the adaptor is plugged in.
Always unplug the adaptor when the vacuum cleaner is left on the charging stand for a longer period
of time without being used.
19
English •