Nidec Leroy-Somer Field Keypad RTC Manuel D'installation page 18

Field RTC Keypad
Step 1: use a Torx 25 screwdriver to unscrew the cover.
1
1
Size 1 or 2
Size 3
Step 2: connect the RJ45 keypad cable to the Commander ID300/302 connector.
RJ45
RJ45
2
2
Size 1 or 2
Size 3
Step 3: power on the drive. Make the required application settings with the keypad.
Step 4: once settings are finalized, power down the drive. Wait 10 minutes then unplug
the RJ45 connector from the drive.
Installation and connections
18
5690 en - 2020.03 / c