Thermor 200L Notice D'utilisation Et D'installation page 62

Overview
7.1. Lengths of permitted ducts.
Exterior/Exterior ducting
Air Outlets/Inlets
Semi-rigid galvanised
duct Ø160mm
Lengths
Max.
HDPE duct Ø 160 mm
L1 + L2
Note: The directional vents can reduce or eliminate the use of ducting elbows. For more information on
directional vents, see "Positioning the product".
7.2. Adjustment of inlet and outlet vent direction.
❶ Unscrew the vents'
locking screws
rotate them to select
the required direction
60
Installation
Roof
12 m
28 m
❷ Turning them 120°
and points them backwards.
Use Maintenance
Standard configurations
x 2
Wall Roof
12 m
26 m
❸ Turning
another 120°
them towards the sides.
Warranty
x 2
Wall Roof
5 m 10 m
16 m 24 m
them ❹ Do not point the
points vents towards
other.
Configuration prohibited
because
recirculation of cold air
in the device!
Wall
each
of the