Commissioning And Operation - Klarstein AEROWAVE Mode D'emploi

EN
34

COMMISSIONING AND OPERATION

Time setting
Once the power plug of the unit is plugged into the power outlet, the screen will display
"0:00" and the unit will beep once.
1. Press the TIMER/CLOCK button twice. The hour display flashes.
2. Turn the knob to adjust the hour. A time between 0 - 23 can be entered.
3. Press the TIMER/CLOCK button again to adjust the minute.
4. Turn the Rotary encoder to adjust the minute. A time between 0 - 59 can be set.
5. Press Sue again to finish the setting by pressing the TIMER/CLOCK button. ":"
flashes on the screen.
Note: If you do not set the time, no time will be displayed when the power is
turned on. If you press the STOP/CLEAR button while setting the time, the machine
automatically returns to the previous status.
Timer
1. When you press the TIMER/CLOCK button once, "00:00" is displayed on the
screen
2. Turn the knob to set the desired time (the maximum preparation time is 95 minutes).
3. Press the START/+30SEC button to confirm the setting.
4. When the time you have set has elapsed, the appliance will beep five times. When
the timer expires, the screen displays the current time.
Microwave function
1. Press the POWER/GRILL/CONVEC/COMBI button once "P100" flashes on the
screen.
2. Press the START/+30SEC key to confirm "P100" will then light up permanently on
the screen.
3. Either press the POWER/GRILL/CONVEC/COMBI key several times or turn the
control knob to set a power of 100% - 10%. The power levels are displayed in the
order "P100", "P80", "P50", "P30" and "P10".
4. Press the START/+30SEC button to confirm your selection.
5. Set the desired preparation time with the rotary control. A time between 0:05 -
95:00 minutes can be set.
6. Press the START/+30SEC button to start the microwave.