Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS (continued)
• Properly align the Front Grille with the Rear Grille (Fig. 16). To secure the Front Grille onto the
fan, raise the built-in clips around the Front Grille and fasten these clips onto the Rear Grille.
Fig.16
D. DETERMINING THE HEIGHT OF THE FAN
The unique Twist & Lock
cooling needs. Twist the top pole and either pull up or push down to find your ideal height then
twist again to lock in place. (see label on back of fan pole);
• Securely grasp the top portion of
the pole and twist counter clockwise
to unlock.
• Pull up or push down to adjust height
(placing your foot or hand gently on
the base will help with the height
adjustment) (Fig 17).
• Once you have selected the desired
height, twist clockwise until you feel
the pole lock into place. (Fig 18).
• DO NOT USE THE SCREW on the
pole for height adjustment.
REMOTE CONTROL BATTERY INSTALLATION/REPLACEMENT INSTRUCTIONS
A. Remove battery door by sliding downward in direction of arrow.
B. Insert 2 AAA batteries (not included) into the remote following
the directional guides in the recessed slots (Fig. 19).
C. Replace battery door by sliding upward opposite of arrow
direction until door snaps in place.
NOTE: DO NOT MIX OLD AND NEW BATTERIES. DO NOT MIX
ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE
(NICKEL-CADMIUM)BATTERIES.
SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.
height adjustment feature lets you choose the perfect height for your
TM
Fig.17
Fig.18
Fig.19
5
Publicité
