Maintenance And Cleaning - Oceanic OCEARTT91W8 Guide D'utilisation

VI. MAINTENANCE AND CLEANING
ICING
Defrosting the refrigerator:
Defrosting your refrigerator occurs at every compressor stop. No intervention
on your part is necessary.
During operation there is the appearance of drops of condensation or ice on the
rear wall. They will be eliminated during deicing described below. The produced
water will flow through the drain hole and will be collected in the tank located
on the compressor from which it will evaporate.
Defrosting the low temperature compartment:
In order to allow the appliance to function properly, it is necessary to defrost at
least once a year or when the ice layer is greater than 10 mm.
From time to time you can remove the layer of ice that has formed with a
squeegee or other plastic instrument.
NEVER USE A METAL INSTRUMENT OR ELECTRIC APPLIANCE TO DEFROST.
CAUTION :
When defrosting, never use sharp or metallic objects to remove ice from the
evaporator surface to avoid damaging the evaporator surface. Reconnect the
power again after more than 15 minutes.
Defrosting process:
Excessive ice accumulation will affect the cooling performance of your device. It
is therefore recommended to defrost your appliance at least twice a year or
whenever ice accumulates.
To defrost the device, choose a time when your device is not too charged.
Remove all food and place in another refrigerator or in a cool place. Set the
thermostat to the off position (0), unplug the appliance and open the door.
EN-28