Overmax Camspot 3.7 Pro Manuel De L'utilisateur page 16

•
To pair the camera, scan the QR code from the phone screen
through the camera lens, holding the camera 15-20cm away. Try
to hold your mobile phone in a stable position while scanning.
•
When you hear the sound signal, click "I heard the sound".
Wait for the device to complete the configuration.
•
After adding the device, click „Finish" to finish adding the
EN
device (fig. 5).
5. Description of the mobile application functions
(fig. 6)
Real-time preview interface:
1.
HD/SD – change recording resolution FullHD / HD
2.
Volume control
3.
Zoom
4.
Full screen
5.
Photo
6.
Two-way audio communication
7.
Video recording
8.
Play (microSD card FAT32 required, max. 128 GB)
9.
Gallery
10. Bright/dark application mode
11. Private mode (allows you to limit data transfer by turning
off the camera)
12. Night mode
13. Motion tracking
14. Motion sensor
15. Sound sensor
16. Control
17. Locations
18. Cloud
19. Smart functions
20. Patrol function
21. Alarm (switches off automatically after 10 seconds)
22. Edition
In order to access the camera view via a web browser, turn on the