Axis P7701 Guide D'installation page 11

Page 10 AXIS P7701 Installation Guide
AXIS IP Utility - single decoder/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS P7701.
Automatic discovery
1. Check that the AXIS P7701 is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the decoder appears in the window, double-click it to open its home page.
4. See page 12 for instructions on how to assign the password.
Assign the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your computer.
2. Select the AXIS P7701 in the list.
Assign new IP address to the selected device and enter the IP address.
3. Click the button
4. Click the Assign button and follow the on-screen instructions. Note that the decoder must be
restarted within 2 minutes for the new IP address to be set.
5. Click the Home Page button to access the decoder's web pages.
6. See page 12 for instructions on how to set the password.