Analogue Control; Digital Control - Domus DTA-11 Mode D'emploi

4.2.

Analogue control:

4
3
After the first minutes of drying and the 6 minutes of Cool-down, the machine stops and is ready
to start a new cycle.
The green pilot light on the control panel (2) tells us that the machine is operating. The
red pilot light on the control panel (4) tells us that the heating is operating.
4.3.

Digital control:

5
2
1.- Timer
2.- Timer pilot
3.- Thermostat
4.- Thermostat pilot
5.- Start button
1
 Select Button: selection
 Start/Stop Button
 Buttons
Increase/Decrease
. Prog Button: Programming
97