Télécharger Imprimer la page

Respironics InspirationElite Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

Never operate this product if it has a damaged cord or plug, if it is not working
properly, if it is has been dropped or damaged, or dropped into water. Return the
product to a service center for examination and repair.
Keep the cord away from heated surfaces.
Never block the air opening of this product or place it on a soft surface, such as a
bed or couch, where the air openings may be blocked. Keep the air openings free
of lint, hair, and the like.
Never use while sleeping or drowsy.
Never drop or insert any object into any openings.
Do not use outdoors or operate where aerosol (spray) products are being used or
where oxygen is being administered in a closed area such as an oxygen tent.
Do not use compressor and nebulizer separately.
SAVE THESE INSTRUCTIONS
How To Use Your Inspiration Elite
1. Check the medication nebulizer cup for damage. (The nebulizer cup enclosed
with your Inspiration Elite is disposable and should be replaced regularly. Ask
your healthcare provider for replacement guidelines and supplies.)
2. Place your Inspiration Elite unit on a firm, flat surface near an electrical outlet
and in an area where you can be seated comfortably during your treatment.
3. Plug the power cord into the electrical outlet.
4. Do not operate the unit without the filter or with a clogged (dirty) filter. Operating
the unit with a dirty filter can impair proper operation and cause damage that is
not covered by the warranty.
5. Wash your hands before preparing your medication.
6. Assemble your nebulizer cup and add your prescribed medicine following your
prescription and the separate nebulizer instructions.
7. Connect one end of the tubing to the bottom of the cup and the other end
of the tubing to the air outlet on the unit.
8. Turn the power switch on ( ) to begin your treatment.
l
9. When your treatment is complete, turn the power switch off (
10. Clean the medication nebulizer cup according to its instructions.
O
) and unplug the unit.
Care and Cleaning of Your Inspiration Elite
CAUTION: To reduce risk of electric shock, DO NOT DISASSEMBLE
1. Unplug the unit before cleaning.
2. Use a damp cloth to wipe down the outside of the compressor at least
once each month (or more if necessary).
3. Check the filter at least once each week. Replace the filter when dirty.
Replacement filters are available where you purchased this product
(Package of 4: Part No. 929-4 or Package of 50: Part No. 929-50).
4. To change the filter:
Lift up the filter and remove it by twisting and pulling it straight up.
The filter should be replaced when it becomes discolored. Do not
wash or reuse the filter.
5. After each cleaning, check that the unit is working properly by verifying that
air still comes out of the nozzle when the unit is turned to the "on" position.
6. The unit is oil-free. Do not lubricate.
7. Service should only be performed by an authorized dealer. Unauthorized repair
voids warranty.

Publicité

loading