Hoover HHT6300/2X Manuel D'instructions page 8

If there is gap between the wall and the cooker hood, you may install the L-shaped
bracket on the bottom of the hood by two screws (3 x 12mm).
The installation of the L-shaped bracket is optional.

WARNING:
StartUsingYourCookerHood
Rockerswitch

1.Insertthepowerplugintothesocket.
2.Pushswitch①to,thelampwillbeon;pushswitch①to"0",thelampwill
beoff.
3.Pushtheswitch②into"I、II",themotorwillbeon"low、high"two
speeds,pushinto"0",themotorwillbeoff.
 For safety reason, pl ease use only the same
size of fi xing or m ounting screw which are
recommended in this instruction manual.

Failure to install the screws or fixing device in
accordance with these instructions may result
in electrical hazards.
Rocker switch
8